About us

Политика конфиденциальности

Our goal and vision:
Ensuring the uniformity of measurements
in the analysis of quality indicators of grain crops and feed

One of the most important elements of the system for ensuring the uniformity of measurements is control (standard, reference) samples, as a means of transferring the unit to its other elements.

Control (standard, reference) samples are a key link in ensuring the traceability, reliability and comparability of the results of analyzes - this is one of the available and effective means of transferring a unit of quantity.

Control samples are widely used to control the accuracy of measurement results, calibration, verification, calibration of measuring instruments, control of metrological characteristics during testing (including for the purpose of type approval), validation of measurement procedures, and assessment of laboratory qualifications.

The use of control (standard, reference) samples to establish the metrological traceability of measurement results, the comparability of measurement results in laboratories can hardly be overestimated.

The correct choice of control samples is the foundation and guarantee of an objective assessment of the quality of the results obtained.

An error at the stage of selecting control samples will lead to a negative economic effect (the device is incorrectly calibrated). That is why it is very important what control samples, what quality, and how you use in your work.

Unfortunately, the nomenclature of control samples of grain crops is insufficient for the normal functioning of the system for ensuring the uniformity of measurements. Therefore, our company is engaged in the creation of control samples of grain crops with different indicators.

The production of control samples (comparison samples, reference samples) is one of the key areas of our activity.

All produced control samples undergo a procedure for determining quality indicators in laboratories that comply with the requirements of DSTU ISO/IEC 17025 and have official confirmation of this.

Each control sample is accompanied by a passport, which contains all the information necessary for its proper use and storage.

The samples are packaged in vacuum bags with a density of 120 microns.

Each copy of the sample is labeled.

In addition, control samples are one of the components of the evidence base in resolving contentious issues of product compliance with the declared characteristics, in coordinating the results of the analysis for the objectivity of settlements with customers and reducing costs.


Product Liability Notice
Customer satisfaction is the central issue of our company. Therefore, we have developed a website where information is openly provided for each product. In this regard, please note that, as a rule, the responsibility for the quality of the product lies with your contractual partner who supplies you with the corresponding product.

This limitation does not apply in the event of a gross breach of our obligations due to negligence or willful intent. In the event of simple negligence, we shall only be liable, except in the event of damage to life and limb or bodily injury, if we breach essential contractual obligations (basic contractual obligations), while our liability is limited to typical and foreseeable damages. To the extent that liability is excluded or limited accordingly, this also applies to the personal liability of our employees, employees, representatives, authorities and vicarious agents.


A responsibility
This website has been created with the utmost care. However, we do not guarantee the complete accuracy of the information provided and the absence of errors in it. Any liability for damage caused directly or indirectly by the use of this website is excluded unless the damage was caused intentionally or due to gross negligence. If links from this website lead to websites of third parties, we are not responsible for the content of these pages.